manualshive.com logo in svg

Pottinger NOVACAT 302 CF, Руководство оператора, Страница: 39 / 74

Поделиться
Скачать
Pottinger NOVACAT 302 CF Скачать руководство пользователя страница 39

- 39 -

1901-EN WUNSCHAUSRÜSTUNGEN_3850

EN

CROSS FLOW

Safety advice

 WARNING

Risk of serious injury through the drawing-in of 
clothing, hair or body parts.

t

Never open or remove guards while the 
motor is running!

 CAUTION

Danger of injury through ejected stones and other 
foreign bodies. Particularly from the the ejector end 
of the transverse auger (7) and when tailgate is open.

t

Maintain a safe distance from the machine 
when motor is running.

t

Guide people out of the danger areas.

t

Take extra care when the fields are stony or 
when working near roads and paths.

t

Immediately replace damaged equipment 
parts that limit the throwing distance of the 
objects. (e.g.: Protective apron ejector (7))

t

Refer people out of the danger areas.

 CAUTION

Risk of injury through cutting, amputation and 
crushing of body parts by moving parts. Particularly 
from the the ejector end of the transverse auger (7) 
and when tailgate is open.

t

Always operate this machine from the tractor 
seat.

t

Maintain a safe distance from the machine 
when motor is running.

t

Guide people out of the danger areas.

 CAUTION

Risk of injury through cutting, amputation and 
crushing of body parts by the V-belt drive.

t

Maintain a safe distance from the machine 
when motor is running.

t

Guide people out of the danger areas.

Содержание NOVACAT 302 CF











































































Отзывы:

Нет отзывов