Pottinger NOVACAT 302 CF Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 74

Pottinger NOVACAT 302 CF Скачать руководство пользователя страница 13

- 13 -

2000_DE-ANBAU_3784

EN

ATTACHING TO TRACTOR

Safety advice

DANGER

Life-threatening danger through operating a machine
that is unroadworthy or damaged

t

Check the vehicle for roadworthiness prior
to every operation (lights, brakes, protective
panels …)!

DANGER

Life-threatening danger through implement operation
with self-driven machines. The field of vision during
a transport journey is restricted when the device is
attached.

t

Operate the machine only with tractors
whose ﬁeld of vision remains unaffected by
the unit during transport.

For further safety instructions see Supplement A1, pt. 7),
8a. - 8h.)

Hitching implement to tractor

1. Set lower link on tractor

- Fix the lower linkage so that the implement cannot

swivel out to the side and the headstock is centrally
positioned.

2. Attaching implement to tractor

WARNING

Risk of injury resulting in death or other serious injury
from driving over or rolling over a person located
between the implement and the tractor.

t

Before approaching the tractor, direct all
persons out of the danger area between
tractor and implement.

t

After approaching the tractor, secure it
against rolling away (braking in, wheel
chocks) before anyone is allowed to enter
the danger area.

- Connect the lower linkage with the implement lower

linkage bolt, and secure. The hydraulic lower linkage
compensator can be fitted in the left lower linkage
arrester hooks by activating the dual-acting servo unit.

- Adjust the lower link bolts (1) on the bearing frame,

according to the three-point category, and the track
width using the fixing screw. The mower must not touch
the rear tractor tyres.

NOTE

Risk of property damage due to falling of the device.

t

Make sure you hit the desired hole on the
bolt with the ﬁxing screw! Otherwise the
device may come loose from the coupling
and fall to the ground.

3 drilled holes

Locating screw

- Connect upper link and secure.
- Connect cardan shaft.

«
...
11
12
13
14
15
...
»

Содержание NOVACAT 302 CF











































































Отзывы:

Нет отзывов