Pottinger NOVACAT 302 CF Скачать руководство пользователя страница 17

Страница: 17 / 74

- 17 -

1900 EN_TRANSPORT_POSITION_3784

TRANSPORT AND WORKING POSITION

Safety advice

DANGER

Life-threatening danger through the mower tipping
over

Change from the working to the transport
position only on level, solid ground.

DANGER

Life-threatening danger through rotating or ejected
components

Switch off the cutter bar drive.

Wait until the cutter bar has stopped moving
before swivelling it up.

WARNING

Risk of injury resulting in death or other serious
injury when the mower is swivelled.

Ensure that no one is standing in the mow-
er’s swivel range

Changing from working position to field

transport position

Procedure:

WARNING

Risk of injury resulting in death or other serious
injury when the mower is swivelled.

Ensure that no one is standing in the mow-
er’s swivel range

1) Raise the mower into field transport position using the

single-action control unit

Changing from field transport to

transport position

NOTE

Danger of damage to cardan joint or cardan shaft
stub at the angular gear input point!

The cardan shaft may break if the brake is
engaged when changing the transport position.

Disengage the cardan shaft brake before
changing the transport position.

Procedure:

1)Turn drive off and wait for mower discs to come to a

standstill

WARNING

Risk of injury resulting in death or other serious
injury when the mower is swivelled.

Ensure that no one is standing in the mow-
er’s swivel range

2) Pull control line

3) At the same time swivel the mower into transport position

using the dual-action control unit

TIP

If the double-acting control unit is actuated without pulling
the control line at the same time, the horizontal position
of the mounting frame changes.

Содержание NOVACAT 302 CF











































































Результаты поиска

Содержание NOVACAT 302 CF

Отзывы:

Pottinger NOVACAT 302 CF, Руководство оператора, Страница: 17 / 74

Результаты поиска

Содержание NOVACAT 302 CF

Отзывы: