Pottinger NOVACAT 302 CF Скачать руководство пользователя страница 15

Страница: 15 / 74

- 15 -

2000_DE-ANBAU_3784

ATTACHING TO TRACTOR

TIP

The mower is to be swivelled into field transport position.

TIP

A hydraulic upper link is recommended (double-acting
implement).

5. Control of hydraulic relief

TIP

The degree of soiling influences the weight with which
the tractor presses on the ground.

1. Set the right lower link pin at the correct ground clearance.

Arrowheads point to each other. (see "Attaching
implement to tractor")

2. Move single-acting servo to "Float" position.
3. Check the bearing pressure:

by lifting the cutter bar on one side. The weight
on the cutter bar, inside and outside, should
be 75 kg.

517-10-07

75 kg

6. Adjustment of the hydraulic relief

1. Adjust the 3-way-valve on the headstock up to set the

"Hydraulic relief" function .

2.  Activate dual-acting servo
3.  Read the preload pressure on the manometer.
  Repeat steps 2 and 3 until the required pressure can

be read on the manometer.

4. Close the 3-way-valve on the headstock (move to middle

position)

-  Reference values for preload pressure ex works:
  Display value on manometer
  for machine without a conditioner:  110 bar
  for implement with conditioner:

145 - 150 bar

7. Set right lower link ground clearance

WARNING

Risk of injury resulting in death or other serious
injury from squeezing.

Stay outside the machine area during the
setting process.

Direct third persons out of the danger area
during the setting procedure.

- Set the right lower link.

1. Set the mowing unit in "floating" position using the

single-acting servo

2. Move the lifting gear in the appropriate direction,

until the indicator arrowheads on the relief cylinder
point directly to each other.

For NOVACAT 302, NOVACAT 352 and NOVACAT

402 this setting means approx. 700 mm ground
clearance to the right lower link bolt;

8. Set power take-off r.p.m.

- Set appropriate power take-off r.p.m. on tractor

TIP

A transfer placed near the transmission gives information
about the rpm for which the disc mower is designed.

9. Check rotation direction

- The power take-off rotation direction is suitable when,

looking from the front, the outer cutting discs rotate
inward.

504-12-01

Содержание NOVACAT 302 CF











































































Результаты поиска

Содержание NOVACAT 302 CF

Отзывы:

Pottinger NOVACAT 302 CF, Руководство оператора, Страница: 15 / 74

Результаты поиска

Содержание NOVACAT 302 CF

Отзывы: