Conversion from transport to workingposition
Safety Precaution!
Changing from working position to transport position is only to be carried
out on even, firm ground.
- Stopcock opened (position E)
- Make sure that swivel area is free and
that nobody is standing in the danger
area.
- With hydraulic raising: move the control valve (ST) briefly to the "raise" position
simultaneously pulling on the rope (S).
Doing this releases the mechanical locks.
- Position tractor's servo-valve (ST) at "lower". The rotor is swivelled down to
working position.
- Pin the bolts on the slewing headstock (SB) into position A.
Important!
Only reposition bolts when the machine is in the raised position.
A
E
TD31/90/21
ST
GB
WORKING POSITION
- 11 -
9600-GB ARBEITSSTELLUNG (212)
Содержание EUROHIT 58 N
Страница 17: ...GB ANHANG TITELBLATT 341 SUPPLEMENT...