(358) TRANSPORTSTELLUNG 9500-GB
TRANSPORT AND WORKING POSITION
- 9 -
GB
Conversion from Transport to Working Position
- Swivel U-shaped flap into position
"G".
When cutting bar is lowered the
relieving spring is somewhat more
tensioned which enables the bar to
rest on the ground with less weight.
Swinging cutter bar down
- Make sure that swivel area is free
and that nobody is standing in the
danger area.
- Gently raise cutter bar with
swivel cylinder so that hook
(13) can be released.
- Release hook (13) by pulling on the rope (S2).
- Lower cutter bar hydraulically.
Lowering the Machine
- Before disconnecting hydraulic hose (26) extend cylinder (27) completely,
so that no residual pressure interferes with connecting up later.
Parking in the open
When parking for longer periods in the
open, clean plunger rods and then coat with
grease.
Transport Position 3
• Mower bar swivelled back and then up.
1. Swivel mower bar back as described in "Transport
Position 1".
2. Move mower bar
into vertical position
as described in
"Transport Position
2".
- Secure cutter bar
with hook (13).
3. Before driving on
roads always check
correct locking!
Attention!
Never let mowing mechanism run with
the mower raised.
-
Connect lighting and raise implement
for transport.
- Before leaving the tractor lower cutter bar to
ground!
Reducing the Total Height in the
Transport Position
In this position the external guard plate can also
be swivelled in (see previous page).
TD 20/91/2
P Ö T T I N G E R
27
26
FETT
TD49/93/2
TD43/92/20
TD25/90/26A
