(338) TRAKANBAU 9800-GB
ATTACHING TO TRACTOR
GB
- 7 -
Adjusting lower links
- Adjust tractor's hydraulics (ST) using bottom stop.
Lower links approx. 600 mm.
This height allows optimal evenness when working on uneven ground and need
not be changed for swinging cutter bar up.
- Connect hydraulic snap coupling for swivel cylinder.
Important recommendation!
A transfer, which is located near the gear, advises
which p.t.o. speed your mower unit is equipped for.
Standard: Gear for power take-off 1000 rpm.
Order number: spare part book
Fitting drive shaft
- Before operating for the first time, drive shaft is to be checked and adapted if
necessary. See alse chapter "Drive Shaft" in supplement B.
ST
1000 rpm
540 rpm
TD 18/96/2