User’s Manual
15
2.3.2
Charging the Battery Pack with a Power Adapter
a) Using a RS232/Charging Cable or USB/Charging Cable
1.
Plug in the RS232/Charging cable or the USB/Charging cable to the
TPC7050
2.
Connect the AC adapter to the cable’s power jack and an electrical outlet.
Figure 2-8 Supplying Power
b) Using a DC-IN Converter
1.
Plug in the DC-IN Converter to the PDA bottom connector
2.
Plug in the connector of the power adapter with DC-IN Converter
3.
Connect the power adapter to a power source
Figure 2-9 Charging with Power Adapter
Notes:
!
When charging the battery pack, the Power LED on the Mobile computer is
Red.
!
When the battery pack is fully charged, the Power LED turns to green.
Power supply
DC-IN Converter
