Posligne ODP 200, Техническое руководство

Страница: 77 / 84

ODP 200 Technical Manual
77
yL, yH, select the number of data bytes (xL+xH
×
256) in the vertical direction for the bit image.
[Details] In standard mode, this command is effective only when there is no data in the print buffer.
This command has no effect in all print modes (character size, emphasized, double-strike,
upside-down, underline, white/black reverse printing, etc.) for raster bit image.
If the printing area width set by GS L and GS W is less than the minimum width,
the printing area is extended to the minimum width only on the line in question.
The minimum width means 1 dot in normal (m=0,48) and double-height (m=2,50),
2dots in double-width (m=1,49) and quadruple (m=3,51) modes.
Data outside the printing area is ready in and discarded on a dot-by-dot basis.
The position at which subsequent characters are to be printed for raster bit image is specified by
HT (Horizontal Tab) ESC $ (Set absolute print position), ESC
＼ ＼ ＼ ＼
(Set relative print position),
and GS L (Ste left margin).
If the position at which subsequent characters are to be printed is not a multiple of 8, print speed
may decline.
The ESC a (Select justification) setting is also effective on raster bit image.
When this command is received during macro definition, the printer ends macro definition,
and begins performing this command. The definition of the command should be cleared.
d indicates the bit-image data. Set time a bit to 1 prints a dot and setting it to 0 does not print a dot.
GS w
n
[Name]
Set bar code width
[Format]
ASCII GS w n
Hex 1D 77 n
Decimal 29 119 n
[Range]
2
≤
n
≤
6
[Description]
Set the horizontal size of the bar code.
n specifies the bar code width as follows:
Binary-level Bar Code
n
Module width (mm) for
Mult-level Bar code
Thin element width (mm) Thick element width (mm)
2 0.282 0.282 0.706
3 0.423 0.423 1.129
4 0.564 0.564 1.411
5 0.706 0.706 1.834
6 0.847 0.847 2.258
Multi-level bar codes are as follows:
UPC-A, UPC-E, JAN13 (EAN13), JAN8 (EAN8), CODE93, CODE128
Binary-level bar codes are as follows:
CODE39, ITF, CODABAR
[Default]
n
= 3
[Reference]
GS k