Posligne ODP 200, Техническое руководство

Страница: 68 / 84

ODP 200 Technical Manual
68
①
The printing area width is extended to the right to accommodate one character.
Printable area
Left margin Extended to right
Printing area width set by
nL
and
nH
②
f the printing area width cannot be extended sufficiently, the left margin is reduced to
accommodate one character
Printable area
℃ Extended to right
Left margin ℃Reduce left margin
℃ If the printing area width cannot be extended sufficiently, the right space is
reduced.
If the width set for the printing area is less than one line in vertical, the following processing is
performed only on the line in question when data other than character data (e.g., bit image,
user-defined bit image) is developed:
℃ The printing area width is extended to the right to accommodate one line in vertical for
the bit image within the printable area.
℃ If the printing area width cannot be extended sufficiently, the left margin is reduced to
accommodate one line in vertical.
The commands which set the printing area width for bit image printing and its minimum widths
are as follows:
Bit image (
ESC *) :
Single density mode = 2 dots
Double density mode = 1 dot
Downloaded bit image (
GS /):
Double width mode or Quadruple mode = 2 dots
Normal mode or Double-height mode = 1 dot
NV bit image (
FS p ) :
Double width mode or Quadruple mode = 2 dots
Normal mode or Double-height mode = 1 dot
Raster bit image (
GS v 0 ) :
Double width mode or Quadruple mode = 2 dots
Normal mode or Double-height mode = 1 dot
[Default]
nL
= 0,
nH
= 2
[Reference] GS L , GS P
GS
＼ ＼ ＼ ＼
nL nH