Posligne ODP 200, Техническое руководство

Страница: 71 / 84

ODP 200 Technical Manual
71
correcting the cause of the error and executing DLE ENQ
n
(1 ≤ n ≤ 2). If an error due to a circuit failure (e.g.
wire break) occurs, it is impossible to recover.
Bit 6: When printing is stopped due to high print head temperature until the print head
temperature drops sufficiently or when the paper roll cover is open during printing,
bit 6 is On.
Third byte (paper sensor information)
Bit Off / On Hex Decimal Status for ASB
Off 00 0 Paper roll near-end sensor: paper adequate
0,1
On 03 3 Paper roll near-end sensor: paper near end
Off 00 0 Paper roll end sensor: paper present
2,3
On 0C 12 Paper roll end sensor: paper not present
4 Off 00 0 Not used. Fixed to Off
5,6 - - - Undefined
7 Off 00 0 Not used. Fixed to Off
Fourth byte (paper sensor information)
Bit Off / On Hex Decimal Status for ASB
0-3 - - - Undefined
4 Off 00 0 Not used. Fixed to Off
5,6 - - - Undefined
7 Off 00 0 Not used. Fixed to Off.
[Default]
n = 0.
[Reference] DLE EOT , GS r
GS f
n
[Name]
Select font for HRI characters
[Format]
ASCII GS f
n
Hex 1D 66
n
Decimal 29 102
n
[Range]
n
= 0, 1, 48, 49
[Description]
selects a font for the HRI characters used when printing a bar code.
n
selects the font from the following table:
n Font
0, 48 Font A (12 x 24)
1, 49 Font B (9 x 24)
[Details] —HRI means Human Readable Interpretation.
—HRI characters are printed of the position specified by
GS H
.
[Default]
n
= 0
[Reference]
GS H, GS k