POSIFLEX RT-1016A, Руководство пользователя

Страница: 9 / 16

9
Cable connectors like the connector of LAN cable have to be gently inserted
until a click sound is given. It is recommended that the I/O ports, such as COM
(DB9) port and VGA port, should be fastened with connector thumb screws
after the I/O cable connectors are completely connected. And please make sure
that each connector has to be connected to the right peripheral device in the
right way.
CAUTION: On doing insertion or extraction of a cable connector, please
always hold the connector head itself instead of pulling the cable wire.
Doing this could damage the cables, which is considered as an artificial
damage and is not covered by the warranty. The means of power cord
should be connected to a socket-outlet with earthing connection.
ATTENTION: Lors de l'insertion ou de l'extraction d'un connecteur de
câble, veuillez toujours tenir la tête du connecteur elle-même au lieu de
tirer le fil du câble. Cela pourrait endommager les câbles, ce qui est
considéré comme un dommage artificiel et n'est pas couvert par la
garantie. Le cordon d'alimentation doit être connecté à une prise de
courant avec mise à la terre.
Installing Optional Upgrade Kits and Peripherals
RT-1016A is an expandable model which allows you to upgrade its own
capacity by additionally installing multiple peripheral devices, such as
magnetic stripe reader (MSR), fingerprint or iButton sensors, and 2
nd
POS
monitor, according to your preference. The following will give you brief
instructions on how to expand on your current POS system with these optional
upgrade kits. Before proceeding with the installation of peripherals, please
make sure the POS system is completely shut down to prevent damage.

Installing Side Mount Upgrade Kits
Located at left side on the back of your system
unit, side mount compartment is mainly used for
installation of side-mounted equipment, such as
magnetic stripe reader. For detailed installation
instructions, please refer to the user manual
specific to the device which you intend to
mount onto the terminal.

Installing Rear-Mount POS Monitor