POSIFLEX RT-1016A, Руководство пользователя

Страница: 10 / 16

10
RT-series POS terminal also allows you to
additionally install rear-mount POS monitor to
expand its functionality. Regarding the step-
by-step instructions which aim to help you
mount it onto your POS system, Please refer
to the user manual specific to the device you
intend to install.

Installing PoweredUSB or USB Hub
Please go through the below steps to complete the installation of
PoweredUSB or USB hub.
1. After tilting the screen all the way down, remove the system back
cover.
1.1 If the system back cover is fire-resistant, first locate the
screw as indicated in the figure, and then remove it.
1.2 Hold down the release lever at the
bottom of the system back cover and
then pulling the cover outwards
2. To remove the stand cover from the base, grab the top side of the
cover, (1) lift the stand cover up gently, (2) pull it at a 45 degree
angle, and then (3) slide it in the horizontal direction shown by the
arrow.
3
2
1
Screw for Fire-Resistant
System Back Cover