Part 20
selected.
Software switch SW4-2&3 helps user to save paper by reducing the barcode
height to 25%, 50% or 75% of the original size. Please refer to the following
table to change this switch’s setting.
Effect of positions 2 & 3 on Barcode Height Reduction as in table below:
SW4 Pos. 2
OFF
ON
OFF
ON
SW4 Pos. 3
OFF
OFF
ON
ON
Barcode Height
Reduce
Disable
Reduce 25%
Reduce 50%
Reduce 75%
This function is to reduce the spaces between every two lines in every single
paragraph. For SW4-4&5, please refer to the below table before regulating the
percentage of line space reduce.
Effect of positions 4 & 5 on Line Space Reduction as in table below:
SW4 Pos. 4
OFF
ON
OFF
ON
SW4 Pos. 5
OFF
OFF
ON
ON
Line Space Reduce
Disable
Reduce 25%
Reduce 50%
Reduce 75%
For switch 4 position 6 & 7, it can reduce the spare space between paragraphs.
No matter how many blank lines, this function will reduce the total unused
space for three particular percentages which are 25%, 50% and 75%. Please
refer to the following table to adjust switch 4-6&7.
Effect of positions 6 & 7 on Line Feed Reduction as in table below:
SW4 Pos. 6
OFF
ON
OFF
ON
SW4 Pos. 7
OFF
OFF
ON
ON
Line Space Reduce
Disable
Reduce 25%
Reduce 50%
Reduce 75%
For software switch SW4-8, it can control hardware DIP switch to be disabled
or available. When it is set to ON, the SW1 can set up through software
switch1 only. The functions of Hardware DIP Switch will be invalid setting.
Note: Please reboot the printer after setting adjustment finished.
警告使用者
警告使用者
警告使用者
警告使用者
這是甲類的資訊產品，在居住的環
境 中使 用 時 ， 可 能會 造 成 射 頻干
擾，在這種情況下，使用者會被要
求採取某些適當的對策。
T31454
