POSIFLEX PD-30 UE Series, Руководство пользователя

Страница: 7 / 16

Page 7
Do not overdo the tightening or unrecoverable thread damage will occur.
PD-309UE for KS or DT series
The PD-309UE can be attached to the corner in bottom plate of the KS series,
with slim base, DT series and Gen.6 & 5 base of KS
series. It takes examples of this LCD customer display to
fix in the KS series, and DT series. Refer to the pictures
in
Pix.1 at right. Use the 3 attached screws to fix the
metal base plate of the PD to bottom of mini slim base or
DT-20X at the circled positions. For mini slim base,
connect the interface cable to go into the base through cable exit arrowed in
Pix.2 at right to the main unit. For DT-20X arrange the interface cable to go
through under bottom to connector area arrowed in
Pix.1
at above right.
CAUTION: There are self-tapping screws for PD-309UE when available
in Gen. 5 base stand and please aim to the holes which marked “DT” as
shown in the upper picture Pix.1. Other Bing Head Screws are available
when fixed in KS series, DT series and Gen.6 base stand of KS series.
PD-308UE for FT series:
1. To install PD-308UE onto FT series host system,
the back cover of FT system base has to be
opened. First push in the circled knobs on
both sides as in the right pictures to remove
the back cover.
2. Remove the pole cover on rear edge of the
base top cover of FT system by first removing
the 2 arrowed screws in the left picture and
then pushing the wedge shaped pole cover up.
3. Insert the base of PD-308UE from top of FT
system base and screw back the 2 screws as in
the right picture. Connect the interface cable
to appropriate port.
Stand Alone Model:
This instruction is for stand alone
model only. Please unpack the inner
box of pole display and it is easy to
find the base, display unit with tube
and adaptor separately. Please
remove the PE foam and bring out the components carefully.
Pix. 2