KS-6810 series Technical Manual 40
A
A
B
B
C
C
REPLACE MAINBOARD
The main board is fixed inside the
system back cover assembly as in
the left picture. Please disconnect
the red arrowed internal speaker
cable. Please then remove the 7
screws in circles to release main
board with metal I/O plate from
back cover.
To reassemble the whole system
back, please just do the counter
actions in reverse order.
OPTIONAL SSD INSTALLATION
To install the optional SSD HDD, the SATA HDD in the main unit must be removed.
Please follow the steps A to C to install the SSD HDD.
A: Please screws SSD HDD card on the bracket first as the red circled in the following
picture.
B: Afterward, take the SSD HDD with fixed bracket to the location where is on the
back of LCD bracket and push the module as blue circled and arrowed in the
following picture.
C: After fasten the
module;
please
plug the power and
data cable to the
SSD HDD module.
