POSIFLEX Jiva KS-6215 Series, Техническое руководство

Страница: 61 / 65

KS-6215 / KS-6215I / KS-6217 series Technical Manual 6 - 5
JUMPER SETTINGS
The “
«
” marks in the following tables denote the factory default settings.
CMOS DATA CONTROL
STATUS OF JP10 ON SOLDER SIDE CMOS DATA CONTROL
1-2 short Clear CMOS data
2-3 short Normal operation
VGA PORT +12 V DC SUPPLY SELECT
STATUS OF JP12 ON SOLDER SIDE PIN 9 STATUS
1 – 2 short VGA port Pin9 su 12 V DC
1 - 2 open VGA port Pin9 not connected
COM1/COM2 DC SUPPLY SELECT
STATUS OF JP11 ON SOLDER SIDE PIN 9 STATUS
1 – 3 short COM1 Pin9 connected to 5 V DC
3 - 5 short COM1 Pin9 connected as RI
2 – 4 short COM2 Pin9 connected to 5 V DC
4 - 6 short COM2 Pin9 connected as RI
COM3/COM4 DC SUPPLY SELECT
STATUS OF JP20 ON SOLDER SIDE PIN 9 STATUS
1 – 3 short COM1 Pin9 connected to 5 V DC
3 - 5 short COM1 Pin9 connected as RI
2 – 4 short COM2 Pin9 connected to 5 V DC
4 - 6 short COM2 Pin9 connected as RI
Please note that if the 5 V DC supply is selected, it won’t be disconnected just
by disabling the port. Therefore, please always remove the DC supply to that COM
port before disabling a COM port.
«
«
«
«
«
«