POSIFLEX Jiva KS-6215 Series, Техническое руководство

Страница: 44 / 65

KS-6215 / KS-6215I / KS-6217 series Technical Manual 5 - 8
connect the RS232 modem to any COM port. Save the configuration and exit the
CMOS setup program. The Preset Power On Control will then be ready.
LAN WAKE UP
The LAN Wake Up function is supported under pure DOS environment only. It
is not applicable to Windows DOS or Command Prompt Mode. In this application,
there needs to be 1 master machine and 1 target machine connected together through
LAN. Both machines should be using same brand of LAN chip.
First the MAC address of the target machine should be checked. Please obtain
the file “RSET8139.EXE” from Posiflex Product Information CD in subfolders like
\Drivers\KS631X\LAN_621 and execute this file on the target machine. Select the item
“View Current Configuration” in the Main Menu and write down the 6 2-digit numbers
of the item “Ethernet Address:” for the network technician. Then the target machine
should be powered off in a normal way with AC power supply and LAN connections.
Now the networking technician at the master machine can execute the same file
“RSET8139.EXE” and select “Run Diagnostics”
à
“Run Power Management Test”
à
“Master Machine”
à
“Magic Packet”. There will popup a dialog box. Enter the
registered 6 2-digit Ethernet Address of the target machine and press “Enter” then the
target machine of that Ethernet Address will be automatically powered up.
FINGERPRINT SENSOR
When the system is delivered with SD-400 or SD-700 with fingerprint sensor
and when the system has preloaded OS, the driver for the optical fingerprint sensor will
be installed for separated demonstration on use of the fingerprint sensor. For software
developers to use all functions of the sensor in their AP, proper SDK (software
development kits) should be purchased from the sensor module supplier. The supplier
for the sensor module used in SD-400 / SD-700 is DigitalPersona, Inc. and the module
used is “U.are.U 4000B”. It is advisable to visit their web site:
http://www.digitalpersona.com/developers/products.php
SMART CARD READER
The Windows driver for the smart card reader can be found in the subfolder
“\Drivers\KP\SC200” in the Posiflex Product Information CD. The reader is PC/SC