POSIFLEX Aura PP-8800 Series, Руководство пользователя

Страница: 20 / 24

Part 20
SW3 Switch Poison Behavior Table
Switch
position
ON OFF
1
Raster Bitmap Print by line print. Raster Bitmap Print by buffer batch.
2~4 Reserved.
5~8 Print Density Adjust
For switch position 3-1, it defines the printing behavior of the printer on
graphic printing. When it is set to ON, the printer prints on each printing
command received immediately. However, the printer may have to engage
brake frequently waiting for next command resulting in trembling. When this
switch is set to OFF, the printer starts printing only when more graphical data
are collected thus performing a much smoother printing operation.
Effect of positions 5, 6 , 7 & 8 on Print Density is defined as below:
SW3 Pos.5
OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF
SW3 Pos.6 OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF
SW3 Pos.7 OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF ON
SW3 Pos.8 OFF OFF OFF OFF OFF OFF OFF OFF ON ON ON ON ON
Print
Density (%)
100 105 110 115 120 125 130 95 90 85 80 75 70
Since the qualities of different paper are not alike, please regulate the print
density and printing speed to obtain the satisfaction of printing quality.
SW4 Switch Poison Behavior Table
Switch
position
ON OFF
1 Available “Beep” sounds after printing. Disable “Beep” sounds after printing.
2~3
Barcode Height Reduction. (Refer to the table below)
4~5 Line Space Reduction (Refer to the table below)
6~7 Line Feed Reduction (Refer to the table below)
8
DIP switch is disabled
Software Switch SW1 is enabled
DIP switch is enabled.
Software Switch SW1 is disabled
SW4-1 switch controlled the “Beep” sound after printing. Please select “ON”
if this beep sound is required and it will not make any sound after “OFF” is
selected.
Software switch SW4-2&3 is helping user to saving paper by reduce the
barcode height to 25%, 50% or 75% of the original size. Please refer to the
following table to change this switch’s setting.
Effect of positions 2 & 3 on Barcode Height Reduction as in table below:
SW4 Pos. 2 OFF ON OFF ON
SW4 Pos. 3
OFF OFF ON ON
Barcode Height
Reduce
Disable Reduce 25% Reduce 50% Reduce 75%
This function is to reducing the spaces between every two lines in every single