Part 10
front edge inside the paper exit slot.
INSTALLING DRIVER
There will be a Posiflex Product Information DVD or a separate CD of similar
nature, which is specifically create for the PP-8800/8800E&PP-8800/8800E-
W&PP-8800/8800E-L. Please find the appropriate subfolder from the non-
specific Posiflex Product Information DVD and please find the information
document such as “read me” or installation guide or application guide and
follow the instructions inside.
LAN and Wi-Fi PRINTER SPECIFIC ISSUES
Web Manager for PP-8800/8800E-L
The default static IP for the PP-8800/8800E-L is 192.168.192.168 and default
listen port is 9100. User may set his own IP to the same network segment and
use any browser to connect to the printer IP to configure the LAN setup of the
PP-8800/8800E-L including changing the printer IP for application according
to his network administrator’s request. However,
DHCP is not supported
.
Reset Button in Pin Hole
As the setup for the PP-8800/8800E-L&PP-8800/8800E-W can be set freely,
the changes are not well registered some troubles could be introduced.
Therefore, in PP-8800/8800E-L&PP-8800/8800E-W, there is a “Reset pin
hole” near the LAN connector or Wi-Fi Module. Use something like a ball pen
tip or straightened end of paper clip to push and hold for at least 5 seconds into
this hole will reset the LAN / Wi-Fi setup of the printer back to the default
values at delivery so the user may re-do all setup. The LAN setup can be
viewed in second paragraph of self-test printout for the PP-8800/8800E-L.
LAN POS Printer Manager
This utility can be used to manage multiple PP-8800/8800E-L’s connected in
same network under Windows as long as there is no conflicting IP in the
network. This utility can assign to each LAN printer a different device name
for easy recognition. In case of confusion, please check the MAC addresses
listed in this utility against the MAC address label you can find under each
printer.
Any PC connected in same network can use TCP/IP to use PP-8800/8800E-L
in the way like a directly connected local printer. So, for direct I/O control by
tools like “HyperTerminal” all commands applicable to the serial or parallel
interface model can work on PP-8800/8800E-L in the same way, as PP-
8800/8800E except the port must be TCP/IP with the IP address of the printer.
Similarly, for Windows printer driver setup, please “Add Printer” and select
for “Local printer” and select port “TCP/IP” with the printer IP address then
