Page 6
QUICK START-UP
LOADING PAPER
Desk Top Application
1.
Press down the hood release button to release
the top hood.
2.
Raise the released hood wide open
manually.
3.
Drop the thermal paper roll inside the
printer in the orientation as shown in the
picture.
4.
Close the
hood back leaving the tail of the paper
roll coming out of the opening between
the hood and the top cover. If the
power turn on before the paper loading,
it will auto cut excessive paper;
otherwise tear off excessive paper manually.
When to Replace Paper
Whenever the printer gives paper out signal or a red line appears on the
thermal paper, it is the proper timing for replacing the paper. Do not wait till
the print engine is dragging the paper roll at the very end. Remove the leftover
Hood Release Button
