SERVICE MANUAL
CYKLON 5000
Page 32
Service manual C
yklon - V
. 1.0 - 10-03-22 Appr
ov
ed by: JN
ASSEMBLY - 1st STAGE 3720, 3720 10
Place the valve housing (20) in a fixture.
Tighten the cover for valve housing with a torque
wrench (30 Nm) and an open ended insert tool 27
mm.
Tighten the connection with a torque wrench (30 Nm)
and holder insert tool/ bits.
IMPORTANT!
Use bits nr 3119 (L = 40 mm).
First stage valve with G5/8’’ (3720):
Put o-ring (23) on the cup type filter (25). Install them
and the o-ring (24) and the locking screw (22) in the
connection (26). Tighten with a Allen wrench 6 mm.
First stage valve with Yoke (3720 10):
Put o-ring (25) on the cup type filter (26). Install them
and the locking screw (24) in the connection (27).
Tighten with a Wrench 6 mm. Put the protective cap
(21) on the knob (23). Lubricate and screw in the
knob.
Install o-ring (30) on the low pressure hose. Lubricate
the oring and the thread.Tighten the hose with a 13
mm open wrench.
