SERVICE MANUAL
CYKLON 5000
Page 20
Service manual C
yklon - V
. 1.0 - 10-03-22 Appr
ov
ed by: JN
ASSEMBLY - 2nd STAGE 1133, 3224, 3354, 3354 M, 3536
Install the purge button (26) in the cover (24).Screw
the button in the cover-cavity
Install the inhalation diaphragm (23) on the diaphragm
housing(22).
Seat the lip on the diaphragm into the recess on the
inner rim of the diaphragm housing.Use an o-ring
remover or other blunt pointed instrument.
Set the inhalation cover (24) on the diaphragm
housing over the diaphragm.
Place the diaphragm housing complete with
diaphragm and cover into the frame of the assembly
tool.
Insert the locking ring (25) into the upper groove of the
press of the assembly tool. See diagram
Place the press on top on the diaphragm housing.
Tum the knob until you hear or feel a slight click.
Continue turning until you encounter resistance, then
back off the knob to release the housing.
Check the locking ring placement to make sure that it
has completely entered the groove.
