POSBank SlimPOS, Руководство пользователя

Страница: 29 / 64

>>
Power Management Setup.
ACPI Function
ACPI Suspend Type
Run VGABIOS if S3 Resume
Power Management
Video OFF Method
Video OFF In Suspend
Suspend Type
The choices are “Enabled” and “Disabled”.
This item allows you to set ACPI suspend type to S1/POS(Power On Suspend)
or S3/STR (Suspend To RAM).
Select “Auto” to run VGA BIOS if S3 resume automatically.
The "Yes" enables running VGA BIOS if S3 resume.
The "No" disables this function.
There are three selections for Power Management, and each of them has
fixed mode settings
Use this to select the method to turn off the video.
When the system is in suspend mode, the video will turn off.
Select the suspend type. The choice: Stop Grant, Pwron suspend.
The power management setup controls the single board computer's "green" features to save power.
The following screen shows the manufacturer's defaults.
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-off by PWR-BTTN
This determines the IRQ in which the MODEM can use. The choices: NA, 3, 4, 5, 7, 9, 10, 11.
The item allows to set the number of minutes before the system enters suspend mode.
Select “1-15 mins.” to enable HDD Power Down mode between 1 to 15 mins. Select “Disabled” to disable HDD Power Down function.
If you choose “Instant-Off”, then pushing the ATX soft power switch but- ton once will switch the system to “system off” power mode.
You can choose “Delay 4 sec”. If you do, then pushing the button for more than 4 seconds will turn off the system, whereas pushing the button momentarily (for less than 4 seconds)
will switch the system to “suspend” mode.
Bios setup utility
29
3