______________________________________________________________________________________________
For proper operation, the backstop must be manually pushed to the full up (playing) position, or the full down (storage)
position. Operate backstop slowly to prevent damage or injury.
Installation, Operation, and Maitenance Manual
www.porterathletic.com
1835 Portable Basketball Backstop
Page 20 of 39
INST1835
All rights reserved.
888-277-7778
7/23/2018
Copyright
2017 by Porter Athletic.
Spring Adjustment
35 to 50
The tension springs on this backstop have been pre-adjusted at the factory for proper raising and lowering of the
backboard. However, should it be necessary to adjust the springs after years of use, or with the addition of a shot clock,
the following adjustment procedures should be followed. As a safety precaution, it is advisable to check operation of
backstop with two individuals (one standing on each side of the backstop) in the event of unexpected movement, or undue
forces exerted by the backstop support mechanism. Refer to detail on page 16 for adjustment of tension springs.
WARNING
- When making adjustment, the backstop must be in the up and locked position. Do not turn the adjustment
nuts (C) more than two turns before trying operation of backstop, to avoid erratic or sudden movement, which may result
in bodily injury or damage to the backstop. When checking folding action, keep all individuals clear of backstop and stand
to one side while grasping handle.
Spring setting – For proper operation of this backstop, it is highly recommended that the spring tension be adjusted so
backstop will be held in a static position with the vertical supports at an approximate 35
to 50
angle from the horizontal
position. See detail below.
