DETAIL "K"
14-1/2"
14"
18-1/2"
Electrical Junction Box Mount:
A thin steel plate has been included on the rear vertical support for easy installation of electrical junction boxes.
The dimensions of the plate are shown above in Detail "K". The plate is made of thin, 3/16" thick steel which can
be drilled to mount the junction box directly or mount a bracket for tool-free attachment of a junction box. Junction
boxes up to 6" thick can be mounted to this plate, noting that any brackets or cables used in combination with the
junction box will reduce this limit.
ENSURE ALL ELECTRICAL CABLES PROTRUDING FROM THE JUNCTION BOX ARE FREE FROM PINCH
POINTS THROUGHOUT THE TRAVEL OF THE RAISING/LOWERING CYCLE OF THE BACKSTOP. IF
CABLES ARE LEFT ATTACHED TO THE JUNCTION BOX, DURING EACH SETUP CHECK FOR KINKED OR
FRAYED CABLES AND REPLACE AS-NEEDED.
www.porterathletic.com
Copyright
2017 by Porter Athletic.
All rights reserved.
888-277-7778
7/23/2018
INST1835
Page 15 of 39
1835 Portable Basketball Backstop
Installation, Operation, and Maitenance Manual
Assembly & Setup
