background image

6

Volts). Do not attempt to use it on any other voltage. 

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY PACKS

WARNING:

 

For safe operation, read this manual and manuals originally supplied 

with tool before using the charger.

The battery pack is not fully charged out of the carton. Before using the battery pack and 

charger, read the safety instructions below. Then follow charging procedures outlined.

READ ALL INSTRUCTIONS

•  

Do not incinerate the battery pack even if it is severely damaged or is completely 

worn out.

 

The battery pack can explode in a fire. Toxic fumes and materials are 

created when LI-ION battery packs are burned.

•  

Do not charge or use battery in explosive atmospheres, such as in the presence of 

flammable liquids, gases or dust. 

Inserting or removing the battery from the charger 

may ignite the dust or fumes.

•  

If battery contents come into contact with the skin, immediately wash area with 

mild soap and water.

 If battery liquid gets into the eye, rinse water over the open 

eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery 

electrolyte for Li-ion batteries is composed of a mixture of liquid organic carbonates and 

lithium salts.

•  

Contents of opened battery cells may cause respiratory irritation.

 Provide fresh air. 

If symptoms persists, seek medical attention.

WARNING: 

Burn hazard.

 Battery liquid may be flammable if exposed to spark or flame. 

•  

Charge the battery packs only in 

 PORTER-CABLE 

chargers.

•  

DO NOT splash or immerse in water or other liquids. 

This may cause premature cell failure.

•  

Do not store or use the tool and battery pack in locations where the temperature may 

reach or exceed 105°F (40C˚) (such as outside sheds or metal buildings in summer).

WARNING:

 

Never attempt to open the battery pack for any reason. If battery pack 

case is cracked or damaged, do not insert into charger. Do not crush, drop or damage 

battery pack. Do not use a battery pack or charger that has received a sharp blow, been 

dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer, 

stepped on). Damaged battery packs should be returned to service center for recycling.

WARNING:

 

Fire hazard. Do not store or carry battery so that metal objects can 

contact exposed battery terminals. 

For example, do not place battery in aprons, 

pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc. 

Transporting batteries can possibly cause fires if the battery terminals 

inadvertently come in contact with conductive materials such as keys, coins, hand 

tools and the like. 

The US Department of Transportation Hazardous Material 

Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes 

(i.e., packed in suitcases and carry-on luggage) UNLESS they are properly protected 

from short circuits. So when transporting individual batteries, make sure that the battery 

terminals are protected and well insulated from materials that could contact them and 

cause a short circuit. 

NOTE: LI-ION batteries should not be put in checked baggage.

FUNCTIONAL DESCRIPTION

  

Figure A

1. Trigger Switch

2. Forward/Reverse Button

3. Chuck Collar

4. Hex Quick-Release Chuck

5. Battery 

6. Battery Release Button

7. LED Work Light

8. Bit Tip Holder

This product uses the batteries and chargers listed below.  

20V Max* Lithium-Ion Batteries: PCC680L, PCC681L, PCC682/PCC682L, PCC685L

20V Max* Lithium-Ion Chargers: PCC690L, PCC691L, PCC692/PCC692L, PCC695L, PCC699L

Содержание PCC641





































Отзывы: