background image

5-ENG

RISK FROM MOVING PARTS

                 RISK OF BURNS

                RISK OF FALLING

IMPORTANT SAFETY INSTRUCTIONS (cont’d)

WHAT CAN HAPPEN

HOW TO PREVENT IT

WHAT CAN HAPPEN

HOW TO PREVENT IT

WHAT CAN HAPPEN

HOW TO PREVENT IT

MOVING PARTS

 SUCH AS THE PULLEY,

FLYWHEEL, AND BELT 

 CAN CAUSE SERIOUS

INJURY

  IF THEY COME INTO CONTACT WITH YOU

OR YOUR CLOTHING.

ATTEMPTING TO OPERATE

 COMPRESSOR 

WITH

DAMAGED OR MISSING PARTS  OR ATTEMPTING
TO REPAIR COMPRESSOR WITH PROTECTIVE
SHROUDS REMOVED CAN EXPOSE YOU TO
MOVING PARTS 

AND CAN 

RESULT IN SERIOUS

INJURY.

TOUCHING EXPOSED METAL

 SUCH AS THE

COMPRESSOR HEAD OR OUTLET TUBES,  

CAN

RESULT IN SERIOUS BURNS.

NEVER OPERATE

 THE 

COMPRESSOR WITH

GUARDS

 OR COVERS WHICH ARE DAMAGED OR

REMOVED.

ANY 

REPAIRS

 REQUIRED ON THIS 

PRODUCT

SHOULD BE PERFORMED BY AUTHORIZED
SERVICE CENTER PERSONNEL.

NEVER TOUCH ANY EXPOSED METAL PARTS ON
COMPRESSOR

 DURING OR IMMEDIATELY AFTER

OPERATION.

 COMPRESSOR WILL REMAIN HOT

FOR SEVERAL MINUTES AFTER OPERATION.

DO NOT REACH AROUND PROTECTIVE SHROUDS
OR ATTEMPT MAINTENANCE UNTIL UNIT HAS
BEEN ALLOWED TO COOL.

A PORTABLE 

COMPRESSOR CAN FALL

 FROM A

TABLE, WORKBENCH OR ROOF 

CAUSING

DAMAGE TO THE COMPRESSOR AND COULD
RESULT IN SERIOUS INJURY OR DEATH TO THE
OPERATOR OR BYSTANDERS.

ALWAYS 

OPERATE COMPRESSOR IN A STABLE

SECURE POSITION

 TO PREVENT ACCIDENTAL

MOVEMENT OF THE UNIT.  

NEVER OPERATE

COMPRESSOR ON A ROOF OR OTHER ELEVATED
POSITION.  USE ADDITIONAL AIR HOSE TO
REACH HIGH LOCATIONS.

WHAT CAN HAPPEN

HOW TO PREVENT IT

RISK OF PROPERTY DAMAGE WHEN

TRANSPORTING COMPRESSOR

(Fire, Inhalation, Damage

to Vehicle Surfaces)

OIL CAN LEAK OR SPILL

 AND COULD RESULT

IN FIRE OR BREATHING HAZARD, SERIOUS
INJURY OR DEATH CAN RESULT.  OIL LEAKS WILL
DAMAGE CARPET, PAINT OR OTHER SURFACES
IN VEHICLES OR TRAILERS.

ALWAYS PLACE COMPRESSOR ON A PROTECTIVE
M AT WHEN TRANSPORTING TO PROTECT
AGAINST DAMAGE TO VEHICLE FROM LEAKS.
REMOVE COMPRESSOR FROM VEHICLE
IMMEDIATELY UPON ARRIVAL AT YOUR
DESTINATION.

ESW-99 — 9/26/99

Содержание CPF23400P



















Отзывы: