8
Sharpener Unit Safety
• Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
•
WARNING!
The adjusting nut must be tightened before starting to work with the
machine.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
•
WARNING!
Always use the protective shields on the machine. Do not remove the
transparent front guard. If the transparent front guard is damaged or missing, re-turn
tool to authorized service station for replacement.
• Do not use a damaged grinding wheel. Before each use inspect the wheel for chips
and cracks or excess wear. The grinding wheel must be properly mounted and turn
freely. Perform a test run for at least 30 seconds without load. Do not use damaged,
out of round or vibrating grinding wheels.
• Immediately switch off the machine in case of considerable vibrations or if other
malfunctions occur. Check the machine in order to find out the cause.
• The outside diameter and the thickness of your accessory must be within the capacity
rating of your power tool.
!
Safety Warnings for Chainsaw Sharpener
Flexisharp instructions.indd 8
11/07/2018 13:24
