Portek FlexiSharp Скачать руководство пользователя страница 18

18

Technical data

Battery voltage 

20 V   

Input power: 

50W

No-load speed 

6500 min-1

Grinding disk diameter 

108 mm

Grinding disk thickness max. 

3.2 mm

hole diameter 

23 mm

Weight without battery/Charging 

1.7 kg

equipment 

 

   

Sound pressure level LpA 

54.1 dB (A)

Sound power level L

WA

 

67.1 dB (A)

Uncertainty 

K = 3 dB (A)

The sound levels have been determined in accordance with noise measuring process

Technical data

Main Unit

Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact your local government for information 
regarding the collection systems available. If electrical appliances are disposed of in 
landfills or dumps, hazardous substances can leak into the groundwater and get into 
the food chain, damaging your health and well-being.

Li-ion Battery

Do not dispose of batteries in household waste, fire (risk of explosion) or
water. Damaged batteries may damage the environment and your health
if toxic fumes or liquids leak out. Dispose of batteries in discharged condition. 
Dispose of batteries in accordance with the local regulations. Take batteries to an 
old battery collection point where they will be recycled in an environmentally 
friendly manner.

Li-ion

Flexisharp instructions.indd   18

11/07/2018   13:24

Содержание FlexiSharp





















Отзывы: