Porsche 996 TT, Руководство по ремонту

Страница: 1424 / 2099

position.
1 Separating the spot−welded joint
between the outer/inner side members Separate the spot−welded joints between the outer side
member and inner side member −A, C, D− and the front
wall −B− with the spotweld cutter.
2 Separating welds between outer side
member and front wall Grind open the MIG seams between outer side member
−E−
and the front wall −F− and the support shell on the
floorpan −G− .
3 Separating the spot−welded joint
between the wheel housing and closing
panel Separate the spot−welded joint of the wheel housing to the
closing panel −H− using the spotweld cutter.
4 Separating spot−welded joint between
lower shell/wheel housing and hinge
pillar Separate spot−welded joint of the lower shell to the wheel
housing −J, E− and the hinge pillar −I− using the
spotweld cutter.
5 Separating the spot−welded joint
between the wheel housing/ A−pillar
and transverse wall Separate the spot−welded joint (vehicle interior) of the
front wall −P− and hinge pillar −M− to the wheel housing
using the spotweld cutter.
Grind open the MIG seams −N, O− with the parting
grinder.
Separate the spot−welded joint of the wheel housing on
the outside to the front wall −L− using the spotweld
cutter.
top of page
Preparing wheel housing, lower shell and outer side member for
installation and fitting
einordnung
Preparing wheel housing, lower shell and outer side member for installation and fitting 1361