REMOVAL OF DRAWER AND TELESCOPIC
DRAWER RAILS
Removing the drawer
Open the drawer for approx. 5-10 cm and pull fi rmly at
the lower level of the front section using both hands.
DO
NOT pull using the handle.
Open the drawer all the way and pull the rear of the
drawer from the rails.
To reinstall use the reverse procedure, making sure that
the drawer is fully attached to the rails.
Removing the rails
Pull the rail out completely, turning it in the direction of
the arrow shown.
Pull the rail upwards at the same time so that the
foremost attachment of the rail comes away from the
groove in the wall of unit.
Pull the rail directly out so that the rearmost attachment
of the rail comes away from the grove within the wall of
the unit.
To re-fi t please adopt a reverse procedure of the above.
To ensure that the rail has been re-fi tted correctly it
should not come off when lifted.
8
ROUTINE CLEANING
Bain marie basin and heated top surface
Switch the unit OFF from the main electrical power
switch.
Empty and clean the unit after each use.
Do not leave water into the basin for the night.
The water outlet valve is at the bottom of the machine.
Clean the stainless steel surfaces using a mild water
soluble detergent, for example washing up liquid.
Do not
use scrubbing or abrasive products!
DHMC water cassette and cubpoard
Switch the unit OFF from the main electrical power
switch.
Remove the water cassette. If using a commercial
dishwasher place the cassette upside down in the tray.
ENGLISH
The handles of the doors
and drawers are removable.
You can wash the handle in
dishwasher or easily change
a damaged handle to a new
one.
Snap the handle end carefully
with a hammer and the
handle moves to the right.
Make sure the drawer is
properly closed so that the
mechanism will not be
damaged of the snap.
Take the handle off the holes.
Put the handle back in
reverse order.
TO REMOVE A HANDLE
