Popcake PC-10R, Руководство по эксплуатации

Страница: 16 / 56

$
""
Inspecting the bag
1 Take a bag of premix from its storage place and inspect it for
any obvious signs of damage or rupture. Ensure that the cap
is correctly screwed to the bag nozzle. If it is damaged or
ruptured or the cap is not correctly screwed on, do not use it,
instead select another bag and repeat the inspection.
2 Open the lid of the cap and inspect it for any obvious signs of
damage, i.e. tears in the membrane. If the cap is damaged,
please call your authorized distributor for a replacement.
3 With the cap screwed on to the bag nozzle, take the bag in
both hands and gently knead the premix to loosen and blend
the ingredients evenly throughout the bag.
Adding water to the bag
1 Unscrew the cap on the bag nozzle and place the bag on a
flat surface ensuring that none of the premix is dislodged
from the bag. Place the cap lid down in a clean, convenient
position.
2 Using the water bottle provided, fill the water bottle to the top
with clean, fresh, drinking water at 72°F/22°C as displayed on
the temperature strip. Insert the top attached to the bottle into
the neck of the bottle and displace the excess water.
If the bottle is lost, do not use another vessel. Please
call your authorized distributor for a replacement bottle.
3 In one hand, pick up the bag by the nozzle and using the
other hand pick up the filled water bottle. Pour the water from
the water bottle into the bag, being very careful not to spill
any of the water.
4 Pick up the cap and screw it back on to the bag nozzle,
ensuring that it is threaded correctly and not cross-threaded.
5 Always dry the outside of the bag with a clean, dry cloth to
ensure the machine itself is kept clean and dry once the bag
is loaded into it.
Shaking the bag
1 Holding the bag at the opposing corners (on the longest side
of the bag) vigorously shake the bag back and forth for 20-30
seconds.
2 Flip the bag over, holding the opposite two corners and
vigorously shake back and forth for an additional 20-30
seconds.