EN
Pool & Patio Lights
INSTRUCTION MANUAL
Models
Pool and patio lights
Specification
- Water resistance of LED lights: Pool and Patio light - IP68
- Light battery : Lithium
- Remote control distance : 4 meters (13 feet)
- Remote control battery: CR2025 (3V)
- Ambient temperature for operation : 14°C – 35°C
- Charging time: 4 – 8 hours
- Battery autonomy (for information only ): White color : 3-4 hours, RGB colors (multicolour) : 7-9
hours
WARNING!
- This is not a TOY. Keep it out of reach by children.
- Keep all products away from chemical, any liquid, or heat.
- Never jump or stand on the patio furniture.
- Do not put the pool and patio light on the water if damage/crack is found.
- Do not submerge the lights into water.
- To reduce the risk of electric shock, never open the light bottom.
- External adapter :
Never use the external adapter and charger station for purpose other than battery charging
for the light(s) supplied in the same pack.
The external adapter, charger station / socket on the light should not be used outdoor, not
exposed to rain, humidity, any liquid, or heat.
Keep the external adapter and charger station out of reach of children.
Disconnect the external adapter from power when not in use.
Never attempt to open the external adapter, charger station, or light bottom.
CAUTION
- Before placing the light in a pool, remove any floating chemical dispenser.
- Never throw the light into the pool. Place the light on the water gently.
- Do not put the light in the pool when people are swimming.
- Keep remote control away from water, any liquid, or heat.
- Take the light out of the pool when not in use.
Operation
Charge the light - First Step!
WARNING! Never charge the product in a pool, water, or in rain. Charge in a dry, indoor location
only.
Pool and Patio Light
Before first use, charge the battery for 4 - 8hours.
- Place the charger station on a dry and level surface.
- Use clean and dry cloth to clean the surface of the charger station and the bottom of the light.
- Insert the adaptor plug into the socket under the charger station. Fig.1.
- Connect the external adapter to the electrical outlet.
- Indicator light on charger station lights up in green color.
- Place the light properly on the charging base. It will begin to charge and the indicator light will
change to red.
- Indicator light changes back to green when the battery is fully charged.
