Setting Up Your Filter
Fig 11
15. Please Note: Tighten the nut hand tight.
NO
TOOLS ARE REQUIRED
. Fig 11
16. In your accessory bag you will also find a
blank nut. This is placed on the waste outlet to
prevent any leakage which may occur. Hand
tight will do. Fig 12
17. Your cleaning controller is located at the top
of your filter, this unit allows you to switch
between filtration mode and back wash mode.
For normal operation the arrow on the control
knob should be pointing to the center outlet.
Fig 13
You are now ready to position your filter. Attach
you pump and position it, keep in mind the
longer your hoses the slower the flow rate.
Keep hose lengths to a minimum and position
your pump away from the outlet of your filter.
CAUTION:
a.
NEVER
run the UV-C without water passing
through the unit.
b. Small rocks may damage the unit. Therefor
ensure the area where your pump sits is free
from all small solid objects and does not draw
them into the unit.
Fig 12
Fig 13
8
