Always check local government regulations prior
to installing your Pond One product
United Kingdom
According to government guidelines pond
equipment intended for permanent installation
outside must be supplied without a fitted plug.
These appliances are intended for connection to
or hard wiring to the mains supply by means
other than a conventional plug and socket.
This means either a suitable specialist weather
proof outdoor socket or a hard wired socket
indoors must be used. All cables from the
appliance to the socket should be led through a
suitable approved conduit and buried in the
ground or raised above the ground For ease of
visibility, thus avoiding accidental damage from
actions like digging of the ground or mowing of
grass.
An approved earth leakage circuit breaker
(RCCB) or otherwise known as an Residual
Circuit Current Device (RCCD) must be fitted in
the electricity supply line.
The appliance should be connected to the mains
supply using the following colour coding. Refer to
Diagram 1
Red or brown wire - to the live connection ‘
L
’
Blue or black wire - to the Neutral connection ‘
N
’
Green with Yellow stripe wire - to the Earth
connection ‘
E
’
IF YOU ARE IN ANY DOUBT ABOUT
INSTALLING YOUR APPLIANCE YOU
SHOULD CONSULT A QUALIFIED
ELECTRICIAN.
Connecting your appliance to the mains electricity supply
- Country specific instructions
Australia, New Zealand and Hong Kong
In Australia, New Zealand and Hong Kong all
products are supplied with fitted plugs. This plug
should
NOT
be tampered with in any way or
removed. Removal or tampering with the plug
invalidates our guarantee offered with this
product.
L
E
Red or Brown
Blue or Black
Green with a Yellow
Stripe
N
Diagram 1
5
