manualshive.com logo in svg

PompDirect ROBOT PUMPS RW Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
PompDirect ROBOT PUMPS RW Series Скачать руководство пользователя страница 3

Operation &
Maintenance Manual

Pump

RW

4/32

Edition 4

HSC

08-W36

      782-001-GB

1.

FOREWORD

You are to be congratulated on choosing a ROBOT
pump, which will undoubtedly serve you both reliably
and economically for a long time, providing you observe
the Maintenance Instructions given in this manual.
The RW-pump is a Non-Clogging Vortex pump designed
to pump sewage and other solids containing waste
water.
Proper use and maintenance will prolong the operational
life of your ROBOT pump.
This manual contains different warnings and safety
precaution.
Read this manual properly, so that dangerous situations,
physical injury or damage can be avoided.

The RW-pump is designed for professional
use only.  Service and maintenance may only
be done by authorised personnel, after
reading this manual.

The RW-pump in basic version may not be
used in a potentially explosive atmosphere.

When ordering spareparts, always quote.

1. Pump type
2. Code
3. Serial number

This information is found on the dataplate.
(See appendix 1)
Sectional drawings and parts lists are available on
request.
All products manufactured by ITT W&WW Alphen B.V.
are made with great care and according to our high
internal standards. Should you however have any
suggestions concerning our pump range or this
instruction manual which will contribute to the quality of
our product please do not hesitate to contact us.

ITT W&WW Alphen B.V.
Produktieweg 5
P.O. Box 140
2400 AC Alphen aan den Rijn
The Netherlands

2.

GUARANTEE

We refer to the warranty agreement with your
local dealer.

www.robotpompen-onderdelen.nl

T +31(0)294-457712

[email protected]

Содержание ROBOT PUMPS RW Series
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды