Operation &
Maintenance Manual
Pump
RW
18/32
Edition 4
HSC
08-W36
782-001-GB
7.4
Cable entry
Especially when the pump has been in use for a long
time, the compression of the rubber cable
seal might be deminished, which can cause leakage. By
screwing-in the cable entry the seal will be retentioned.
7.4.1 RW 20
Turn the hexagon head of the entry (1) for 1/6 of a turn
clockwise using the right tool.
It is possible that your cable entry is
fitted with a cable clamp.
See 7.4.2.
7.4.2 RW 40
Unscrew the 2 hexagon socket screws (1).
Remove the cable clamp (2).
Turn the hexagon head of the entry (1) clockwise, using
the right tool, so far that it is possible to replace the
cable clamp again.
Screw-in the 2 hexagon socket screws (1).
It is possible that your pump is fitted
with 2 cable entries.
7.4.3 RW 60 / RW 80
Unscrew the 4 hexagon socket screws (1) from
the outer cable entries.
Remove the cable clamps (2).
Turn the hexagon heads of the entry clockwise,
using the right tool, so far that it is possible to
replace the cable clamps again.
Screw in the 4 hexagon socket screws (1).
Turn the hexagon head of the middle entry (3) for 1/6 of
a turn clockwise.
It is possible that your pump is fitted
with only 2 cables.
Fig. 7.1
Fig. 7.2
Fig. 7.3
www.robotpompen-onderdelen.nl
T +31(0)294-457712
