Polytron TSM 1000 HD-C, Руководство пользователя

Страница: 7 / 20

7
7. Installation
Remove the screws and take off the cover, lifting it upwards.
Connect the various SAT levels to the four inputs (SAT 1, SAT 2, SAT 3, and SAT 4).
Levels from different LNBs can also be connected.
The LNB voltage is fixed at inputs 1 and 4.
The current consumption of the LNBs connected must not exceed 250 mA per input.
Please note that a digital-grade Quattro LNB (e.g. a Polytron OSP AP 94) should be used.
If the LED for the LNB supply is not lit, the LNB supply will be interrupted or disrupted.
Please note:
The overall current consumption of all the LNBs connected must not exceed 500mA.
7.1 TSM 1000 HD-C input assignment
The inputs and outputs of the device are pre-programmed at the factory with a standard frequency
assignment (see the extra sheet). This assignment is adapted to the usage of the TSM SAB 09
(already installed in the TSM HD CF).
In order to receive the pre-programmed ASTRA transponders, the satellite inputs must be connected
as shown in the following diagram.
Assignment during pre-programming
1
HH
2
VH
3
HL
4
VL
DC DC
DC DC