Polytron TSM 1000 HD-C, Руководство пользователя

Страница: 8 / 20

8
7.2 Input level
To ensure good reception, make sure that the level at the inputs is between 60 and 80 dBµV.
When receiving digital signals, it is better to have a level that is too low rather
than one that is too high.
Use an attenuator with high input levels
7.3 Output level
The output level is 90 dBµV when supplied. This can be changed
by programming the device (see Point 9.2.2)
Output/OUT USB LED
8
Programming in general
After connecting the power supply cable, the device runs through an internal routine, and all 10
channels are set to the data previously stored. During this time, the Status LED next to the USB
socket will flash green.
A connection between the TSM HD-C 1000 and the laptop or PC is only possible once the status
LED is permanently illuminated green .
The programming software
must first be installed on the laptop
or PC before this is connected to
the TSM 1000 HD-C
USB LED