Polytron TSM 1000 HD-C, Руководство пользователя

Страница: 3 / 20

3
1. Hazard and safety information
Power supply and power cord
The device must be operated only at a power supply with a voltage
of 230 V / 50 Hz.
Connection cable
Place the connection cable always trip proof !
Replace the power cord only with an original power cord.
Potential equalization / grounding
Proper grounding and installation of the device must be carried out according to EN 60728-11 / VDE
0855-1 regulations.
Operation without grounding or potential equalization of equipment is not allowed.
Humidity and placement location
The device must not be exposed to dripping or splashing water. If water condensation occurs, wait
until the device is completely dry. The device must be installed on a vibration-free location.
Ambient temperature and heat effect
The maximum allowable ambient temperature is 50 ° C.
The ventilation holes of the device must NOT be covered under any circumstances. Too much heat
or heat accumulation affect the life of the device and can be a source of danger.
To prevent heat buildup and to ensure good ventilation, the device must be mounted horizontally (eg.
on a wall). The device must not be mounted above, on top, or near heat sources (e.g radiators,
heating plants), where the device is exposed to heat radiation or oil vapors. The installation must be
done only in rooms that ensure compliance with the permissible ambient temperature range, even
under changing climatic conditions.
Warning:
When installed in rooms such as storage or attic one should pay particular attention on compliance
with the ambient temperature. Because of the danger of fire due to overheating or lightning strike, it
is recommendable to install the device on a noncombustible surface. Combustible surfaces are wood
beams or bars, wood boards, plastic materials, etc.
Conditions to ensure electromagnetic compatibility (EMC)
All covers, screws and connectors must be securely mounted and tightened, contact springs must
not be bent or oxidized.