manualshive.com logo in svg

Polymetron SODIMAT 9073, Инструкция по эксплуатации

Поделиться
Скачать
Polymetron SODIMAT 9073 Скачать руководство пользователя страница 83

SODIMAT - Model 9073

C-3

C.2 HYDROFLUORIC ACID 40%

IDENTIFICATION OF THE SUBSTANCE

SIGMA ALDRICH product reference : 47590
Product name : hydrofluoric acid 40%

COMPOSITION/INFORMATION ON INGREDIENTS

Cas no : 7664-39-3
EC index no : 009-003-00-1

HAZARDS IDENTIFICATION

Highly toxic by inhalation, contact with skin and ingestion. Provokes severe burns. Possibility of reversible effects. Gene
mutation possible.
Organs : liver - kidneys 

FIRST AID MEASURES

After skin and eye contact, rinse immediately and abundantly with water and soap at least 15 minutes. Remove
contaminated clothing and shoes Check the eyes have been rinsed by seperating the eyelids with the fingers.
After inhalation : fresh air. In case of asphyxia, put the patient on artificial respiration and put under oxygen if the patient
has difficulty breathung. Do not vomit. If the patient is conscious, dilute 125 to 250 ml of milk or water.
Wash the contaminated clothing. Throw away the contaminated shoes.

FIRE FIGHTING MEASURES

Suitable extinguishing media : chemical dry powder
Methods to extinguish fire : 
- Wear a respiratory apparatus and protective chlothing to avoid any contact with skin and eyes.
Possible fires and explosition dangers :
- toxic fumes liberated in contact with fire. Containers may explode if in contact with fire.

MEASURES IN CASE OF SPILLING

Leave the site. Wear an autonom respiratory apparatus, thick rubber boots and gloves. Absorbe with sand or vermiculite
and store in closed containers for evacuation. Aerate the site and wash the place where it has been spilled.

HANDLING  AND STORAGE

See next section.
Further information :
Any contact with glass, contrete or any other products containing silicium liberates silicon tetrafluoride. Any contact with
cyanide and sulfides provokes cyanide and hydrogen sulphide highly toxic gas. A reaction with carbonates provokes an
energic liberation of carbon dioxide. Violent reaction with N-piperidinphenyl, potassium manganate, bismuthic acid, fluoride,
metallic oxides and any product reacting to water. Any contact with standard metals will liberate hydrogen which may cause
fire or explosion. Mixtures (1:1) of hydrofluoric and nitricacids with glycerol, lactic acid or propylene glycol let the pressure
ncrease in the containers and explode -ration time between 30 minutes to 12 hours).

EXPOSURE CONTROLS/PERSONAL PROTECTION

Wear respiratory mask required by the NIOSH/MSHA, resistant gloves against chemical products, security goggles and
protective clothing. Use this product only under a hood for chemical vapours.
Showers and ocular fontains required.
Facial screen (20 cm minimum).
Avoid any contact with skin, eyes and clothing. Avoid prolonged or repeated exposition. Wash carefully after manipulation.
Poison; Corrosive. Gene mutation possible.
Keep the bottle closed and in a dry, fresh room.

Содержание SODIMAT 9073

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды