Polymetron SODIMAT 9073, Инструкция по эксплуатации

Страница: 44 / 88

SODIMAT - Model 9073
5-10
REMOTE CONTROL
If the monec is microprocessor operated, the "!" character comes before each command set with the
computer. 4 available commands with the computer :
- W - Choose the display of a parameter (Window)
- S - Program the transmitter commands (Set)
- R - Read the programmed value of the parameter (Read)
- Q - Reset remote alarm system
NOTE : The command characters (W, S, R, Q) can be written in capital or small letters.
"WINDOW" COMMAND
This command plays the same role as the scroll keys on the Monec keyboard.
4 options available :
- ":W0 ENTER": selects the value of the concentration measured
- ":W1 ENTER": selects the temperature value
- ":W2 ENTER": selects the potential value
- ":W3 ENTER": selects the flowrate measured
"SET" COMMAND
The SET command allows the Monec remote programming :
":S command number, selected value ENTER"
Select an integer value for "SELECTION" type argument (command 51, 201, 211...).
Example: :S1,1"ENTER""
For arguments type "limits, upper/lower end, ...", select a real value with the point and the exponent '"E" : 10
basis exponent).
Example: ":S506,+5.000E-6"ENTER""
CAUTION : A space corresponds to the ENTER key.