The information provided in the Polycom technical bulletin is provided "as is" without warranty of any kind. No obligation or liability will arise out of Polycom
rendering technical or other advice or service in connection herewith.
Polycom® and the Polycom logo design are registered trademarks of Polycom, Inc. in the U.S. and various countries. All other trademarks are the property of
their respective companies.
Fatal Error
Err Code ####
The handset has detected a fault
from which it cannot recover.
Record the error code so it can be
reported. Turn the handset off then on
again. If error persists, try registering a
different handset to this telephone
port. If error still persists, contact
Polycom technical support and report
the error.
Internal Err. # #
The handset has detected a fault
from which it cannot recover.
Record the error code so it can be
reported. Turn the handset off then on
again. If error persists, try registering a
different handset to this telephone
port. If error still persists, contact
Polycom technical support and report
the error.
Net Busy
Handset cannot obtain sufficient
resources to support a call.
Try the call again later.
No Net Found
This indicates that the handset
cannot find any base stations
and has no additional information
to display as to why. Possible
problems are enumerated below.
No radio link.
Out of range.
Verify that the base station is
connected to the system and powered
on.
Try getting closer to a base station.
Check to see if other handsets are
working within the same range of a
base station. If so, contact Polycom
technical support and report the error.
No PBX
No communication with host
telephone system.
Displays before the system has
synchronized ports with the host
telephone system. Should disappear
when the ports are correctly wired and
programmed.
Make sure the proper PBX switch type
has been configured on the
SpectraLink 6x00 MCU.
Restarting…
The handset is in the process of
rebooting. There will be a 20
second delay in an attempt to let
potential system errors clear.
None.
Service
Unavailable.
Restarting…
An error has caused the handset
to lose the call. It is now making
its best effort to restart and return
to standby mode.
The handset is attempting to register
with the PBX and resume normal
operation.
Waiting
Handset has attempted some
operation several times and
failed and is now waiting for a
period of time before attempting
that operation again.
None. The handset is waiting for a
specified period of time before
attempting that operation again.
System Unavailable
Handset out of range of base
station or system inoperative
Move back into coverage area or wait
for system
System Busy
Insufficient bandwidth available
on base station
Wait for available bandwidth or move
within range of a base station with
available bandwidth
Unregistered
Handset is not registered with
infrastructure
Register handset
