12
16
Define the following parameters:
17
Click
Next
.
18
In the
PRI Settings
dialog box, define the following parameters:
Field
Description
Network Service
Name
Specify the service provider’s (carrier) name or any other
name you choose, using up to 20 characters. The
Network Service Name identifies the ISDN/PSTN Service
to the system.
Default name: ISDN/PSTN Service
Note
: This field is displayed in all ISDN/PSTN Network
Properties tabs and can contain character sets that use
Unicode encoding.
Span Type
Select the type of spans (ISDN/PSTN) lines that are
connected to the RMX. Select either:
T1
or
E1
Default: T1
Note:
Only one
Span Type
(E1 or T1) is supported on the
RMX.
Service Type
PRI is the only supported service type. It is automatically
selected.
Field
Description
Default Num
Type
Select the
Default Num Type
from the list.
The
Num Type
defines how the system handles the
dialing digits.
If the PRI lines are connected to the RMX via a network
switch, the
Num Type
is used to route the call to a
specific PRI line.To let the network interpret the dialing
digits for call routing, select
Unknown (
Default).
For E1 spans, this parameter is set by the system.
