9
To locate the IPEI from the phone’s UI (5020 handsets):
1.
Turn on the handset.
2.
Press
Menu
.
3.
Select
Status
and then select
Firmware version
.
4.
Press
Exit
to exit the menu.
To locate the IPEI on the phone:
1.
Remove the back cover of the battery compartment.
2.
Remove the battery if it is already inserted.
3.
Underneath the battery slot you will see a label with the serial number. Record the serial
number, omitting the last digit so you will get a 12-digit number.
Configuring the DECT System on the KWS600v3
1.
Under the
Configuration
menu, select
DECT
, and then select
System
.
2.
In the
Name
field, the name must always be
DECT
.
3.
In the
PWD
(password) field, enter the word
DECT
then enter it again in the field below.
4.
From the
Subscription
list, select either
With System AC
or
With User AC
.
NOTE:
System AC
allows you set a system-wide password for subscribing handsets.
User
AC
allows you to set the password on a per-user basis.
5.
If the
With System AC
is selected from the
Subscription
list, enter a numerical access code
in the
AC
field (for example,
3179
). You will enter this code when registering new handsets
to the base station.
6.
From the
Tones
list, select the appropriate ringtone for your region.
7.
Select
Enbloc Dialing
.
8.
From the
General Encoder Preference
and
Local Network Coder
dropdown lists, ensure
that
G711u
is the selected CODEC.
9.
Select
OK
.
