3
To change the IP address of your computer for Windows Server 2003/Windows XP:
1.
Select
Start
>
Control Panel
.
2.
If you have the classic view, double-click
Network Connections
. If you have the category view,
double-click
Network and Internet Connections
, and then select
Network Connections
.
3.
Double-click your active LAN or Internet connection.
4.
Select
Properties
.
5.
In the
General
tab, highlight the
Internet Protocol (TCP/IP)
item, and select
Properties
.
6.
In the
General
tab, select
Use the following IP address
, and enter:
IP address:
192.168.1.2
Subnet mask:
255.255.255.0
7.
Select
OK
.
Changing the IP Address on the KWS600v3
New (or factory reset) KWS600v3s are configured with a static IP address. This must be changed so that
the device can communicate on your network.
To change the wireless server’s IP address:
1.
Open your browser and enter the IP address of the KWS600v3. The factory default is
192.168.1.1.
2.
When prompted, use the following default Web access username and password:
Web Access Username:
admin
Web Access Password:
ip1200
3.
Under the
Configuration
menu, select
ETH0
.
4.
Configure the device for Dynamic Host Configuration Protocol (DHCP) or a static IP address.
To configure the device for DHCP:
Select on
DHCP
under the
ETH0
configuration menu.
From the
Mode
list, select
Client
and then select
OK
.
Select
Reset
(under the
Administration
menu) to save your configuration.
To configure a static IP address:
Select
DHCP
under the
ETH0
configuration menu.
From the
Mode
list, select
Disabled
and then select
OK
.
Select
Reset
(under the
Administration
menu) to save your configuration.
