12
The figure below shows an example of how to complete the required fields.
Powering On and Registering Handsets to the
KWS600v3
Once the KWS600v3 has been installed and configured, you must manually register the handsets using
the instructions below.
Manually Registering the 4020/4040 Handsets
1.
Insert the battery, plug in the charger, and place the handset in the charger for four hours.
2.
Press the handset key (
) for a half a second to turn on the handset.
3.
When the handset is powered on, press
MENU
.
4.
Scroll to
LOGIN
.
5.
Press the check mark (
) on the handset.
6.
Scroll to
SUBSCRIPTION CREATE
.
7.
Press the check mark (
) on the handset.
8.
Wait for the handset to find the base station ID and press the check mark (
).
