11
Figure 17 - Editing the volume control event to use the ToLocalRoom group in place of the Amplifier channel.
Click
OK
to
save
the
event
and
the
result
is
shown
in
Figure
18.
Figure 18 - The resulting volume control event after editing and saving the event.
Now
if
the
volume
changes
on
the
HDX
codec,
either
via
an
HDX
IR
remote
or
an
explicit
HDX
API
command
for
adjusting
the
volume,
the
ToLocalRoom
group
within
SoundStructure
will
track
that
change
and,
because
ToLocalRoom
is
a
group,
changes
will
adjust
the
group
members:
Amplifier
and
EagleEye.
This
will
automatically
make
it
louder
or
quieter
to
both
the
audio
amplifier
channel
and
to
the
EagleEye
Director.
Confirming the Physical Wiring Matches the Project Wiring
Now
that
the
project
is
configured
properly,
the
next
step
is
to
confirm
the
physical
wiring
of
the
audio
to
the
Amplifier
and
to
the
EagleEye
Director.
Navigate
to
the
Wiring
page
and
expand
the
output
area
as
shown
in
Figure
19.
In
this
figure
the
Amplifier
is
connected
to
outputs
1
and
2
and
the
EagleEye
Director
is
connected
to
outputs
3
and
4.
