Polyaire airtouch, Руководство по установке

Страница: 11 / 68

11
Components Installation
4.6 Mount the supply air sensor in the
supply air duct between the fan coil and
the first damper and push the plug of
supply air temperature sensor into the
socket on the main module.
4.7 Connect the console to the ‘T’ port
on the main module. If two consoles
are used, connect one to T on the main
module and the other to the extension
module.
4.8 Connect the 24V AC transformer to
screw terminals on the main control
module. If extension module is used,
connect another 24 VAC transformer
to the screw terminals of the extension
module.
4.9 Connect the main module to the
AC unit using the required kit for the
respective AC unit (cables and interface
board). Follow the wiring diagram for
the respective unit provided on Page
33-62 of this manual.